Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Washington Homeowners
An electric gate that won’t open leaves a driveway exposed and a property manager fielding calls. That’s the exact problem we solve. Electric gate repair is a named core service for us, not a sideline squeezed between fence jobs and handyman work, so every technician who shows up in Washington is looking at an operator, a control board, or a safety loop, not a loose board. Our technicians have up to experience and diagnose by brand logic – LiftMaster, FAAC, Elite, Mighty Mule and more – rather than by trial and error. Same-day service is often possible when you call early. Reach us at (888) 260-4909. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Opener Repair
Gate Opener Repair is the work of getting the motor unit and its controls back to reliable operation, and it’s the first thing to book when a gate moves sluggishly, stalls halfway, or stops responding to the remote altogether. Those symptoms usually trace back to a tired operator, a failing limit switch, or a control board that’s stopped reading commands correctly. We work on the brand you already have, so there’s no pressure to replace a unit that only needs a component. Most opener repairs in Washington run roughly $150 to $450 depending on the part and the operator model. The written estimate you get before any work starts is the final price.
Operator and Limit Switch Diagnostics
We test the operator under load and check the limit switches that tell the gate where to stop. A limit switch out of adjustment can mimic a dead motor, and confirming which one is at fault saves you from paying for parts you don’t need.
Remote and Receiver Failures
A remote that works intermittently often points to the receiver or an antenna issue rather than the motor itself. We test the full signal chain from clicker to control board before recommending any replacement.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the whole automated system – the mechanism, the safety devices, and the controls that tie them together – and it’s the right call when the gate misbehaves in ways that don’t point to one obvious part. A gate that reverses for no reason, stops short of full travel, or ignores a vehicle in its path is usually a sensor or safety-edge problem rather than a motor problem. We trace the fault through the control logic so the fix holds. Automatic gate repair in Washington typically lands between $200 and $600 depending on what’s failed and whether a safety component needs replacing. You’ll get a free estimate and a fixed written price before we touch anything.
Safety Edge and Sensor Checks
Safety edges and photo-eyes are the parts that stop a gate on an obstruction. When they fail, the gate can close on a car or a person, so we test them first on every service call.
Control Board Fault Tracing
Control boards manage every input and output on an automatic gate. We read the board’s behavior against the brand’s known failure patterns instead of swapping parts until something works.
Electric Gate Motor
The Electric Gate Motor is the unit that actually drives the gate, and when it fails the whole system stops. Motors fail in recognizable ways: a grinding noise, a hum with no movement, a gate that moves a few inches and quits, or a unit that trips its breaker each time it starts. We service and replace electric gate motors from LiftMaster, FAAC, Elite and Mighty Mule, and we match the replacement to the gate’s weight and swing or slide type rather than dropping in whatever’s on hand. Motor replacement or major repair in Washington usually runs $450 to $1,200 depending on the gate and the operator class. An on-site estimate is free, and the price is set in writing before any work begins.
Motor Sizing and Gate Weight
An undersized motor on a heavy gate will fail early, even if it’s a quality unit. We confirm the gate’s weight and duty cycle against the motor spec before recommending a replacement or rebuilding the drive.
Power and Wiring Inspection
The power run to a gate motor is a common source of intermittent faults. We check voltage at the motor and inspect the wiring for damage or a poor connection before assuming the motor itself is bad. This part of the job involves live electrical circuits, so it’s work for a trained technician – if you see damaged conduit or a tripped breaker that won’t reset, keep clear and call us.
Gate Access Control
Gate Access Control is the system of keypads, card readers, intercoms, and loop detectors that decides who gets through and when. It needs service when codes stop working, a keypad goes dead, or the gate stops recognizing a vehicle sitting on the entry loop. Loop detectors in particular take a beating at busy driveways and can fail quietly, leaving the gate stuck open or closed. We service access-control components on the same call as the operator, so you’re not coordinating two separate trades. Access control repair in Washington generally falls between $150 and $500 depending on the component and whether wiring needs to be re-run. The estimate is free and the price is agreed before any work starts.
Loop Detector Failures
Entry and exit loops are buried in the pavement and fail without warning. We test the loop and its detector to confirm whether the loop itself needs attention or the detector board is the problem.
Keypad and Reader Repairs
A dead keypad is sometimes just a power issue at the post and sometimes a failed unit. We check the supply first, then move to the reader, so you don’t pay for a replacement you didn’t need.
Commercial Gate Operator
A Commercial Gate Operator has to handle far more cycles than a residential unit, and it fails in ways that residential systems rarely do. High-traffic entries, heavy slide gates, and daily stop-and-go use wear out drive components, control boards, and safety devices faster than a home driveway ever would. When a commercial operator goes down, it’s a security and liability problem for the property, not just an inconvenience. We service commercial operators across the brands we know best, including LiftMaster, FAAC, and DoorKing, and we plan the repair around keeping the property secure. Commercial operator repair in Washington typically runs $350 to $900 depending on the operator and the repair. The estimate is free and the price is set in writing before any work starts.
High-Cycle Wear and Component Fatigue
Commercial operators are rated for a specific duty cycle, and running past it shortens the life of every moving part. We assess the wear pattern so the repair addresses what’s actually giving out.
Access Logs and Accountability
Many commercial operators keep records of opens and closes, which we read during diagnosis. That history often points straight to the failure and can help a property manager understand what happened.

Brands We Service
We work on the brand you already have. LiftMaster operators are some of the most common residential units we see, and we know where their control boards and safety sensors tend to wear out. FAAC equipment is built around hydraulic and electromechanical operators, and we’re familiar with how they behave when hydraulic pressure or limit settings drift. Elite operators show up on a lot of slide gates, and we know their drive and control components well. Mighty Mule is a common DIY-installed line, and we’re used to sorting out units where the original installation left the settings or wiring less than perfect.
That brand familiarity is the reason we diagnose by brand, not by guessing. Every operator has its own logic, its own common failures, and its own diagnostic path, and treating them all the same way is how repairs drag out. Whether you have LiftMaster, FAAC, Elite, Mighty Mule, BFT, Linear, Viking, Ghost Controls, or DoorKing equipment, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate stops or reverses mid-travel. That’s usually a limit switch, a sensor, or a control board fault, and continuing to cycle it can damage the operator. It’s a sign to stop using the gate until someone looks at it.
- The motor hums but the gate doesn’t move. A humming motor with no travel often points to a locked drive, a stripped gear, or a power issue. Running it longer can burn out a motor that was still repairable.
- The safety edge or photo-eye isn’t stopping the gate. This is a genuine safety issue – a gate that doesn’t stop on an obstruction can injure someone. Don’t operate it until a technician tests the safety devices.
- The keypad or remote works only some of the time. Intermittent access problems are usually a wiring, receiver, or power fault that gets worse over time. Getting it looked at now keeps it from failing entirely.
- The breaker trips every time the gate starts. That points to a wiring or motor fault, and it’s an electrical safety concern. Keep the gate off and call a professional rather than resetting the breaker repeatedly.
Our Process, Step by Step
- 1
Call and describe the fault. We ask what the gate is doing, what brand the operator is, and whether it’s a swing or slide gate. That short conversation often narrows the likely cause before anyone arrives.
- 2
On-site diagnosis. A technician tests the operator, the controls, the safety devices, and the power supply in a set order. We check the simplest causes first, so you don’t pay for a complicated repair when the answer is a loose connection.
- 3
Written estimate before any work. You get the diagnosis in plain terms and a written price for the repair. Nothing starts until you’ve agreed to it, and that written price is what you pay.
- 4
The repair. We fit the part or make the adjustment the diagnosis calls for, then test the gate through a full cycle. That includes confirming the safety devices actually stop the gate on an obstruction.
- 5
Walkthrough and follow-up. We show you what was done and what to watch for, so you know the next sign that something needs attention. If the repair isn’t holding, you know how to reach us.
How Much Does Electric Gate Repair Cost in Washington?
Electric gate repair in Washington generally runs from about $150 for a straightforward sensor or remote fix up to $1,200 or more for a full motor replacement on a heavy gate. A typical opener repair runs $150 to $450 depending on the operator model and part. Automatic gate repair that includes safety devices usually lands between $200 and $600, access-control work runs $150 to $500, and commercial operator repairs fall in the $350 to $900 range. These are typical estimates, not quotes – the written estimate you get on site is the final price.
What moves the price: the brand and model of operator, whether the part is a common one or a special order, whether the gate is a swing or a slide, and whether the wiring or power run needs attention. Gate weight matters too, since a heavy commercial gate needs a heavier operator to replace a failed one.
How to avoid overpaying: get the diagnosis explained before you approve the repair, and ask whether the fault could be fixed with an adjustment rather than a replacement. A technician who tests before recommending a part is the one you want.
What’s included in a free estimate: the on-site diagnosis, a plain-language explanation of the fault, and a written price. The price is quoted and agreed before any work starts, so you won’t get an invoice bigger than the quote. Call (888) 260-4909 to book an estimate. We answer 24/7.
Our Service Area Near Washington
We serve Washington and the surrounding neighborhoods, including properties in Georgetown, Capitol Hill, and the areas around Rock Creek Park, plus nearby communities in Maryland and Northern Virginia. Response times vary with traffic and location, but for electric gate repair in Washington the goal is to get a technician out the same day when you call in the morning. If your gate is part of a larger system and you need work beyond the operator, our gate repair Washington team handles the mechanical side as well.
Serving Washington, DC – Our Local Coverage Area
We serve Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Washington
Electric gate repair is the diagnosis and fix of the automated system that opens and closes a gate – the operator, motor, control board, safety sensors, and access-control components. It’s different from manual gate repair, which handles the gate’s hinges, tracks, and structure. If your gate has a motor and remote, it’s electric gate repair, and that’s exactly what we do.
Most electric gate repairs take one to three hours on site, depending on what’s failed. A sensor adjustment or remote receiver swap can be under an hour, while a motor replacement may take longer. If a part needs to be ordered, we schedule the return visit once it’s in hand. Call (888) 260-4909 for a time estimate for your specific gate.
Typical electric gate repair in Washington runs from about $150 for a small sensor or remote fix up to $1,200 or more for a motor replacement on a heavy gate. The exact price depends on the operator brand, the part needed, and the gate type. You get a free on-site estimate and a written price before work starts. Call (888) 260-4909 for an exact quote – estimates are free.
Yes, we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. We work on the brand you already have rather than steering you toward a replacement. Our technicians have up to experience and diagnose by brand logic, so the troubleshooting follows how that operator actually works.
Same-day service is often possible when you call early, and we dispatch Sunday through Friday, 7am to 7pm. We answer 24/7, and a call outside dispatch hours is booked into the next opening. We’re closed on Saturday. Call (888) 260-4909 to check availability for your gate.
We stand behind our work and will talk through the warranty terms for your specific repair when we give you the written estimate. Our technicians test the full gate cycle and the safety devices before leaving, and if something isn’t holding after the repair, you can reach us. Call (888) 260-4909 with any warranty question before the work starts.
Clear access to the operator and the control box, and make sure the gate path is free of vehicles and obstructions. If you have the operator manual or the brand and model number, gather it, since that speeds up diagnosis. Please don’t try to fix a motor, wiring, or control board yourself – the electrical side of an automated gate is genuinely dangerous. Call (888) 260-4909 and we’ll walk you through what to have ready.
Schedule Your Electric Gate Repair Service in Washington Today
If your electric gate is down or acting up, call (888) 260-4909 for a free estimate and a written price before any work starts. Our technicians have up to experience with the brands you already own, and we treat a failing gate as the security issue it is. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and calls outside dispatch hours are booked into the next opening. No obligation, just a clear diagnosis and a straight price.
Written by the team at Gate Repair Washington.