Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Washington Homeowners
If your driveway opens onto an empty hinge point, or the gate you inherited with the property finally gave out, you need a new gate designed for your actual opening, not a stock panel forced to fit. Gate Repair Washington handles that end to end: we measure the opening, source the gate and operator, and install the whole system so it works as one unit from the first swing. Our technicians have up to experience and work with the brands most common on Washington properties, including LiftMaster, FAAC, Elite, and Mighty Mule. Installation is measured, ordered, and scheduled, so you get a free on-site measure and a written price before anything is ordered. Call (888) 260-4909. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Automatic Gate Installation
Automatic Gate Installation is the full job: a new gate panel plus the operator, safety sensors, and controls that open and close it without anyone leaving the car. You need it when a manual gate has become a daily chore, when a property changes hands and the old gate no longer suits the entrance, or when an existing automated gate has reached the end of its service life and repair no longer makes sense. We survey the opening, confirm which side the gate should swing or slide toward, check the power source, and specify an operator sized to the weight and width of the panel. We work on LiftMaster and FAAC operators often because both are well understood here, and we install to the manufacturer’s spec rather than working around it.
Site Measure and Layout
Every automatic gate starts with a proper on-site measure. We check the opening width, the grade, the clearance behind the gate, and where power can reach the operator. Getting this right at the start is what keeps the finished gate from dragging, binding, or stopping mid-travel.
Operator and Safety Pairing
The operator has to match the gate, not the other way around. We size the unit to the panel’s actual weight and travel, then pair it with safety edges and photo sensors so the gate reverses if anything is in its path. That pairing is what makes an automatic gate safe to live with.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the whole job from the first measurement to the final test cycle, whether you need a pedestrian gate, a driveway gate, or a commercial entrance. Property managers call us when a gate has to be replaced to spec and the timeline can’t slip, and homeowners call when they want a gate that matches the house and opens on a remote like the rest of the property. We handle manual and automated gates on the same visit schedule, so a gate that starts manual and later gets an operator doesn’t need a second contractor. The written estimate is agreed before any work starts, and the final price is the estimate. We also handle gate repair when a gate can be saved rather than replaced.
Manual and Automated in One Scope
Some entrances need a simple manual gate; others need an operator from day one. We scope both in a single estimate so you can see what each option involves before you commit. If you plan to automate later, we install the gate so that upgrade is straightforward.

Property Manager Scheduling
Commercial and multi-unit entrances need a gate that meets the site’s access requirements and a schedule that respects tenant traffic. We confirm the measurement window and the install window up front. That keeps the gate closed for as short a time as possible.

Electric Gate Installation
Electric Gate Installation means the gate, the operator, the control board, and the access hardware are designed together as one system. You need it when a gate has to open for vehicles, residents, or deliveries without a person walking out to it, and when the access method matters: keypad, remote, loop detector, or intercom. We fit the operator, wire the low-voltage controls, set the limits and force settings, and test every safety input before we hand over the remotes. We work on DoorKing access equipment and FAAC operators regularly, so the control side is familiar territory rather than a learning curve on your driveway.
Control Board and Access Wiring
The control board is where an electric gate either works reliably or frustrates everyone. We wire the inputs cleanly, label what goes where, and set the board so each access method behaves the way it should. A tidy panel is also far easier to service later.
Loop Detectors and Safety Inputs
Loop detectors tell the gate a vehicle is waiting or still crossing, and they’re the difference between a gate that cooperates with traffic and one that closes on a bumper. We install and tune them alongside the safety edges. Every input gets tested before the gate is released to you.
Driveway Gate Installation
Driveway Gate Installation is sized to the vehicles that actually use the entrance, not to a generic width. You need it when the current gate is too narrow for a truck or SUV, when the posts have shifted and the gate no longer lines up, or when a new driveway needs a gate built for it from scratch. We measure the widest vehicle likely to pass through, check the approach angle, and set posts to proper footing depth so the gate hangs true instead of sagging within a season. We handle swing and slide configurations on the same footing plan, and we confirm the finished gate clears the ground across the full travel.
Width and Clearance Planning
A driveway gate has to clear mirrors, trailers, and the occasional moving truck. We plan the opening around real vehicle dimensions and the turning room available. That planning stage is where most gate regrets are avoided.
Post Setting and Hang
Posts go to proper footing depth for the gate’s weight and the soil on site, because a gate hung on a shallow post will bind no matter how well the panel is built. We set, cure, and hang in the right order. The gate should swing or roll with the same effort on day one and a year later.
Sliding Gate Installation
Sliding Gate Installation suits entrances where a swing gate would sweep into the driveway, the sidewalk, or a parked car. You need it when the site has run-out room beside the opening and the driveway is short, or when a slope makes a swing gate impractical. We lay the track or overhead rail, set the posts, hang the gate, and add the operator with the right gearing for the panel’s weight. Sliding gates carry real risk if the panel comes off the track, so we fit end stops and guide rollers properly and test the full run before handover. Track-based gates on Washington properties get checked for level and drainage before the panel ever goes on.
Track and Rail Options
A ground track is simple and dependable but needs the surface kept clear. An overhead rail keeps the ground free but puts more load on the posts. We walk through both for your site and recommend based on run-out space and grade.
Run-Out and End Stops
A sliding gate needs somewhere to go when it opens, and it needs to stop there safely. We confirm the run-out clears fences, planting, and the property line. End stops and bumpers keep the panel from over-travelling.
Gate Opener Installation
Gate Opener Installation is the job of adding automation to a gate that already exists and is sound, or fitting the operator that came with a new gate. You need it when the gate itself is fine but opening it by hand has stopped being reasonable, or when an old operator has failed and the replacement has to match the existing gate’s weight and travel. We check the gate’s balance and hardware first, because an operator bolted to a binding gate will fail early. Then we mount the unit, wire the controls, set the limits, and test the safety reverse. Mighty Mule and LiftMaster units are common on residential driveways, and both are straightforward to set up correctly.
Checking the Gate Before Automating
Automation multiplies whatever the gate already does, good or bad. We check balance, hinge wear, and alignment before the operator goes on. If the gate needs work first, we say so before installing anything.

Limits, Force, and Safety Reverse
The travel limits and force settings decide how the operator behaves when it meets an obstruction. We set them to the gate, then test the safety reverse with a physical block. That test is the one that matters most.
Gate Fabrication
Gate Fabrication is for openings that no stock gate fits: odd widths, sloped ground, a heritage look, or a commercial entrance with specific clearance needs. You need it when the measurement falls outside standard sizes or the gate has to match existing ironwork or a particular design. We take the measurements on site, build the panel to those dimensions, and fit it with hinges or track hardware matched to its weight. Fabrication is measured and ordered, so there’s a lead time, and we confirm it in the written estimate. We also confirm the finish and the hardware spec at that stage so nothing is decided at the last minute.
Custom Sizing and Design
A fabricated gate is built to the opening, not trimmed to fit it. We record the exact dimensions, the ground profile, and the design details that need to carry over. The panel is then made to that spec.
Hardware and Finish Selection
Hinges, rollers, latches, and finish all get chosen for the gate’s weight and exposure. The right hardware is what keeps a heavy panel operating smoothly. We agree these details before fabrication begins.
Brands We Service
We service Elite gate operators and know where their gearboxes and limit switches tend to wear, which makes diagnosis faster than starting from scratch. We also work on Mighty Mule equipment, common on residential driveways, and understand its control layout and the failure points that show up most often on DIY-installed units.
LiftMaster operators are familiar territory, from the control board to the safety inputs, and FAAC units are equally well understood on the commercial and heavier residential side. Whether you have a LiftMaster, FAAC, Elite, or Mighty Mule system, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate no longer lines up with the post. A gate that has dropped or twisted is usually a hinge, post, or footing problem, and forcing it makes it worse. It also puts stress on the operator if the gate is automated.
- The operator runs but the gate doesn’t move. That points to a drive, gear, or limit issue rather than a dead unit. Diagnosing it by brand saves the guesswork and avoids replacing parts that are fine.
- The gate reverses or stops partway. A safety input, limit setting, or control board fault will do this, and it’s the kind of fault that leaves the entrance unusable. It needs proper diagnosis, not a settings guess.
- The gate is heavy to open by hand. A binding gate will wear out a new operator fast. Getting the gate itself checked before automating is the cheaper path.
- You’re planning access changes. Adding keypads, loop detectors, or intercoms to an existing entrance is electrical work. It’s worth having it planned properly rather than added piecemeal.
Our Process, Step by Step
- 1
Call and describe the gate. Tell us the brand if you know it, whether the gate swings or slides, and what’s happening. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
- 2
On-site measure and assessment. We measure the opening, check the grade and clearance, look at the existing hardware, and confirm where power can reach. For an operator job, we check the gate’s balance and travel first.
- 3
Written estimate. You get a written price covering the gate, hardware, and operator where relevant, with the lead time stated. The price is quoted and agreed before any work starts.
- 4
Order and schedule. Once you approve, we order the gate and equipment to spec and book the install. Installation is measured, ordered, and scheduled, not squeezed in same day.
- 5
Install and test. We set posts, hang or track the gate, fit the operator and controls, then test limits, force settings, and every safety input before handover. You get the remotes and a walk-through of the system.
How Much Does Gate Installation Cost in Washington?
Gate installation in Washington is priced per job from a written estimate, and the estimate is free. Typical scenarios break down roughly like this: a straightforward manual gate installed on existing posts usually runs in the lower part of the range, while a full driveway gate with new posts, hardware, and an operator sits at the top. An operator added to a sound existing gate is usually less than a complete new automated system, because the gate itself is already there.
What moves the price: the width and weight of the gate, whether posts need setting or replacing, swing versus slide, and how much wiring the operator and access controls need. Custom fabrication adds lead time and cost because it’s measured and built to the opening. Getting three things right avoids overpaying: confirm the gate is measured on site rather than estimated from photos, make sure the written estimate lists the operator and safety hardware separately, and ask what the lead time is before you approve.
The free estimate includes the site measure, the recommended gate and operator spec, and a written price with lead time. Nothing is ordered until you’ve agreed to it, and the written estimate sets the final price. Call (888) 260-4909 for an exact quote.
Our Service Area Near Washington
We install gates throughout Washington and the surrounding neighborhoods. Because installation is measured and scheduled rather than dispatched, we book the site visit and the install window in advance and confirm both with you. For a gate that’s down and needs assessment sooner, call and we’ll book the earliest opening, Sunday through Friday, 7am to 7pm. Electric gate repair is handled by the same specialist team when an existing system fails.
Serving Washington, DC – Our Local Coverage Area
We serve Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Washington
Gate installation is fitting a new gate to an opening, including the posts, hardware, and operator where the gate is automated. It starts with an on-site measure so the gate is built or selected for that specific width, grade, and clearance. It ends with the gate hung, the controls set, and every safety input tested.
A standard gate on an existing opening can often be installed in a day once the equipment is on site. Custom fabrication and full automated systems take longer because the gate is made to measure and the operator has to be ordered. We state the lead time in the written estimate before you approve anything.
Gate installation is priced per job, and the free on-site estimate sets the final price. The total depends on the gate’s width and weight, whether posts need setting, and how much operator and access wiring is involved. Call (888) 260-4909 for an exact quote.
Yes, we service LiftMaster operators, from the control board to the safety inputs and limit settings. We also work on FAAC, Elite, Mighty Mule, and the other common makes, and we diagnose by brand rather than by trial and error. Whether you’re installing new or repairing an existing unit, we can help.
Same-day service is available for repair and assessment when the schedule allows; new installation is measured, ordered, and scheduled in advance. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 260-4909 to book.
Warranty terms depend on the gate and the operator you choose, and we confirm them in the written estimate before any work starts. Manufacturer coverage on the operator is separate from our workmanship. We’ll walk you through both so you know what’s covered and for how long.
Clear the driveway and the area around the opening so we have room to work, and confirm where the power source is if the gate will be automated. If you know the existing operator brand, have it ready. Beyond that, the on-site measure does the rest; call (888) 260-4909 to book it.
Schedule Your Gate Installation Service in Washington Today
Call (888) 260-4909 to book a free on-site measure and a written estimate for your gate installation in Washington. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, and there’s no obligation to proceed after the estimate.
Written by the team at Gate Repair Washington.