Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Washington Homeowners
A gate that won’t open or close leaves your property exposed, and in Washington that matters. Whether it’s a driveway gate stuck mid-travel or an iron pedestrian gate that no longer latches, our technicians diagnose the actual cause before quoting a fix. We work exclusively on gates, so every visit is handled by someone fluent in the mechanics, the operators, and the brands involved. Our technicians have up to experience, and we’re trained on nine major gate brands including LiftMaster, FAAC, Elite, and Mighty Mule. Electric gate down? That’s exactly what we do. Call (888) 260-4909 for same-day service in Washington, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7. Every job is quoted and agreed before any work starts, so you know the price going in.

Driveway Gate Repair
Driveway Gate Repair covers the gate that protects your vehicles and your entry point, and it’s the most common call we get in Washington. When a driveway gate sags, drags on the ground, or stops responding to the remote, the cause is usually worn hinges, a failing operator, or a track and roller problem. We inspect the full system, not just the symptom, and we work on the brand you already have. A typical driveway gate repair in Washington runs $150 to $650 depending on the parts involved and whether the operator needs attention. We quote and agree the price before any work starts. A free on-site estimate tells you exactly what’s wrong and what the fix costs.
Common Driveway Gate Failures
Hinge wear and post movement are the two failures we see most on driveway gates. When a post shifts, the whole gate racks and the operator strains to move a slab that no longer hangs square. Catching it early keeps a small adjustment from turning into a hardware replacement.
Operator and Remote Troubleshooting
A gate that ignores the remote isn’t always an operator problem. Dead batteries, misaligned safety sensors, and a tripped control board all produce the same symptom. We test each component in sequence so you don’t pay for an operator you didn’t need.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding restores structural integrity when a frame cracks, a hinge bracket tears loose, or a weld breaks under the load of a heavy gate. Metal fatigue, impact damage, and years of swing stress all lead to failed welds, and a gate with a broken joint can drop without warning. We weld on site and check that the frame is square before we close the job, because a weld over a twisted frame just fails again. Gate welding in Washington typically runs $150 to $500 depending on the extent of the repair and the material. We agree the price before we strike an arc, and we tell you plainly when a repair makes more sense than a replacement.
Structural Weld Repairs
Frame cracks and broken hinge mounts are the repairs that keep a gate in service. We grind back to clean metal, weld, and check alignment against the post before the gate goes back into operation. A proper weld has to hold the load, not just look closed.
On-Site Mobility and Safety
Heavy gates are dangerous to move and dangerous to weld around. We brace the gate before we work and confirm the posts can carry the load once it’s back in motion. If a repair won’t hold, we say so before you spend on it.
Commercial Gate Repair
Commercial Gate Repair handles the higher-duty systems that control vehicle and pedestrian access at businesses, apartment buildings, and parking facilities in Washington. Commercial gates cycle far more often than residential ones, so operators, loop detectors, and access-control components wear faster and fail under heavier use. A stuck commercial gate stalls traffic and creates a real security gap, which is why we treat these calls as priority work. Commercial gate repair in Washington typically runs $200 to $900 depending on the operator, the access-control hardware, and whether entry panels need work. Because this is measured, scheduled work, we give you a written price after the on-site estimate, and we agree it before any work begins.
Access Control and Loop Detectors
Loop detectors, card readers, and keypads fail in ways that look like operator faults. We test the access-control chain separately from the gate itself so the right component gets replaced. Getting this order right is how a commercial repair stays affordable.
High-Cycle Operator Wear
Operators on a busy commercial gate work far harder than a home system ever will. Control boards, gearboxes, and limits wear on a different schedule, and catching them early prevents a full stop. We service LiftMaster and DoorKing equipment regularly and know where each one gives out.
Iron Gate Repair
Iron Gate Repair addresses the heavy ornamental gates common on older Washington properties, where rust, seized hinges, and bent pickets are routine. Iron gates are built to last, but their pivot points and latch hardware take constant load, and once corrosion sets in, moving parts bind. We repair the mechanics and the structure together so the gate swings freely and latches cleanly again. Iron gate repair in Washington usually runs $175 to $600 depending on the damage and whether the gate needs welding. We put the price in writing and agree it before we start. If the gate is on an operator, we check the whole system, not just the iron.
Rust and Corrosion Treatment
Rust on an iron gate moves from the joints outward, and it’s the joints that matter. We clean the affected areas and treat the corrosion before refinishing, because paint over active rust fails within a season. The goal is to stop the decay, not hide it.
Hinge and Pivot Repairs
A sagging iron gate usually has a worn hinge or a pivot that’s shifted. We free seized hinges, replace worn hardware, and re-hang the gate so it clears the ground through its full swing. A gate that drags will wear out everything else it touches.
Sliding Gate Repair
Sliding Gate Repair gets your gate moving again when it jumps the track, binds on the rollers, or stops partway through its travel. Sliding gates are heavier and more sensitive to their track than swing gates, so a small misalignment turns into a stalled gate fast. Debris in the track, worn rollers, and a track that’s settled out of level are the usual causes. Sliding gate repair in Washington typically runs $150 to $700 depending on the track work and the operator. We source and agree the price with you before any work starts. A gate that’s come off its track is a genuine safety hazard, so don’t force it back into motion yourself.
Track and Roller Service
The track and rollers carry the full weight of a sliding gate, and they wear predictably. We clear the track, check the rollers for flat spots, and confirm the gate runs level the whole way. A gate that rolls smoothly puts far less strain on the operator.
Safety Sensors and Reversal
Safety edges and obstruction sensors are the parts that stop a sliding gate closing on a person or vehicle. We test the reversal function and the sensor alignment every time we work on a sliding gate. These components are not optional, and we won’t leave a gate operating without them.
Wrought Iron Gate Repair
Wrought Iron Gate Repair covers the decorative gates that add character to a property and still have to function precisely. Delicate scrollwork and fine pickets hide structural weak points, and a bent or cracked section can let the whole gate lose alignment. We repair the ornament and the structure together, keeping the look while restoring the mechanics. Wrought iron gate repair in Washington generally runs $175 to $550 depending on the complexity of the repair and the finish work. We agree the price before any work starts. If a decorative gate is automated, we service the operator and access components as part of the same visit.
Ornamental Section Repairs
Bent scrolls and broken pickets are repaired with matching profiles so the gate looks consistent after the fix. Where welding is needed, we keep the heat controlled to protect the surrounding finish. A repaired section should be hard to pick out.
Finish Matching
Exposed metal left unsealed will rust, so we match the finish as closely as the existing coating allows. That keeps water out of the repair and keeps the gate looking uniform. Finish work gets the same attention as the mechanics.
Metal Gate Repair
Metal Gate Repair addresses the structural and mechanical problems on steel and aluminum gates, from frame damage to mounting and alignment issues. Metal gates are strong but not immune to impact from vehicles, ground movement, and the constant load of opening and closing. When a metal gate binds, sags, or stops latching, the fix usually combines hardware and frame work. Metal gate repair in Washington typically runs $150 to $600 depending on the material and the extent of the repair. We quote the job, agree the price with you, and only then start work. Aluminum and steel fail differently, and we diagnose by material and brand rather than trial and error.

Frame Straightening and Mounting
A metal gate that’s been twisted needs the frame brought back to square before new hardware goes on. We check the posts and the mounting points, since a post problem will pull any repaired frame out of line again. Getting the mounting right is what makes the repair last.
Hardware Replacement
Latches, hinges, and stops wear faster than the gate and are often the whole problem. We replace worn hardware to match the gate’s weight and swing so it operates smoothly. Small parts fail first, and catching them keeps the frame out of trouble.
Wood Gate Repair
Wood Gate Repair focuses on the gates where moisture and movement cause the most trouble, and Washington’s humid summers and wet winters put real stress on timber. Swollen boards, sagging frames, and a gate that drags across the ground are the classic symptoms. Wood moves with the seasons, so we repair with that in mind, refastening and reinforcing where the frame has pulled apart. Wood gate repair in Washington usually runs $150 to $500 depending on the extent of the work and whether hardware needs replacing. We agree the price before any work starts. When an automated wooden gate has operator trouble, we handle that in the same visit.
Rot and Frame Repair
Rot at the bottom rail and the hinge mounting points is the most common wood gate failure. We remove the compromised sections, reinforce the frame, and seal the repair against future moisture. A posted gate can often be saved if the rot is caught early.
Sticking and Seasonal Movement
Wood gates bind when the timber swells, and a gate that worked in spring can drag by mid-summer. We adjust clearances and the latch so the gate has room to move through the seasons. That’s a fitting problem, not a structural one.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service LiftMaster equipment and know where it wears out, from the operator’s control board to the safety sensors that stop it cold. FAAC is another brand we see on Washington properties, and its hydraulically driven arms fail in predictable ways that a brand-familiar technician spots quickly. We work on Elite operators too, and we know the limit and control adjustments that keep them reliable on a heavy gate. Whether you have LiftMaster, Elite, or any other make, we can help.
Mighty Mule is a common entry-level system, and its control boards and battery-backed operation give us specific things to test on every call. Because we’re brand-agnostic, we work on what you already own instead of steering you toward a replacement you don’t need. Our technicians have up to experience across these systems. Our team approaches every brand the same way: diagnose by brand logic, then quote the fix.
Signs You Need a Pro Right Now
- The gate won’t open or close. A gate stuck mid-travel leaves your property open, and forcing it by hand can damage the operator or the frame. Stop using the remote and let a technician find the actual cause.
- The gate drags or binds. Scraping on the ground or heavy travel means hinge, track, or alignment trouble, and the operator is working harder than it should. Left alone, a binding gate wears out the operator and the hardware together.
- The gate sags or hangs crooked. A sagging gate usually points to a post problem or a failed hinge, and it will only get worse under its own weight. Getting it checked early keeps the fix simple.
- The gate closes without sensing. If the safety reversal fails to stop the gate on contact, the gate should not be operated at all. That’s a genuine safety issue, and it needs a technician before anyone uses the gate.
- You hear grinding or see sparking. Grinding gears or electrical sparking at the operator points to a failing drive or a wiring problem. Both can turn into a full failure, and wiring issues should always be handled by a trained professional.
Our Process, Step by Step
- 1
Call and describe the problem. Call (888) 260-4909 and tell us what the gate is doing and which brand it is. That first conversation helps us prepare for the visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
On-site diagnosis. A technician inspects the gate, its hardware, and the operator, and tests the safety sensors and access components. We diagnose by brand, so we know the failure points to check first. Like a good mechanic, we verify before we replace.
- 3
Written estimate, agreed up front. You get a written price for the repair before any work begins. We walk you through what we found, what it costs, and what happens if we discover more once the gate is opened up. Nothing proceeds until you agree.
- 4
The repair. We complete the work with the right parts for your gate and brand, whether that’s welding, hardware, an operator component, or access-control work. If we find something new mid-repair, we stop and talk to you before continuing.
- 5
Function test and walkthrough. We cycle the gate, test the safety reversal and limits, and confirm the latch and travel are right. You see the gate working before we leave, and you know exactly what was fixed.
How Much Does Gate Repair Cost in Washington?
A typical manual gate repair in Washington runs $150 to $500 depending on the gate type and the parts involved. A typical electric gate repair runs $200 to $900, since operator, control board, and access-control work add labor and components. Welding repairs usually fall between $150 and $500, and commercial gate repair runs higher because of the hardware and duty cycle. Those ranges cover most jobs, and the written estimate sets the final price.
What affects the price: the gate type and material, whether the gate is automated, the brand and availability of its parts, and how much welding or frame work is needed. Access-control components like loop detectors and entry panels add to the job. Heavy or high-cycle commercial gates take more labor than a standard driveway gate.
How to avoid overpaying: get a written estimate before work starts, and ask what’s included. A proper estimate lists the diagnosis, the parts, and the labor, so an invoice can’t grow beyond the quote. We test components before replacing them, so you don’t pay for an operator that only needed a sensor adjustment. The price is quoted and agreed before any work starts, every time.
What’s included in a free estimate: an on-site inspection, a diagnosis of the actual failure, and a written price with the parts and labor itemized. You get a clear answer on whether a repair makes sense or a replacement is the better call. Call (888) 260-4909 for an exact quote – estimates are free.
Our Service Area Near Washington
We serve Washington and the surrounding neighborhoods, including Petworth, Brookland, Anacostia, and Georgetown, along with nearby communities in the metro area. Response times depend on the day and the current schedule, but gate failures are treated as priority work. Whether you need a driveway gate fixed or a commercial operator diagnosed, we get a technician out to look. For the full range of what we handle, see Gate Repair Washington, and for automated systems see gate repair.
Serving Washington, DC – Our Local Coverage Area
We serve Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Washington
Gate repair is the diagnosis and fixing of a gate whose structure, hardware, or operator has failed. It covers everything from a sagging hinge and a broken weld to a control board and safety sensors on an automated gate. We handle manual gates, electric gates, and new installation, so the same team can fix what you have or design a replacement. Call (888) 260-4909 for an exact quote – estimates are free.
Most gate repairs are completed in a single visit, though the time depends on the failure and the parts needed. Hardware and alignment work is often quick, while a control board or operator repair takes longer to source and test. Welding and frame work add time, and commercial repairs take longer because of the access-control components. Your estimate tells you what to expect before we start.
Most repairs in Washington run $150 to $900 depending on the gate type and whether it’s automated. Manual gate repairs typically fall in the lower part of that range, while electric and commercial work with access-control components runs higher. Welding and frame repairs sit in between. The written estimate sets the final price, and we agree it before any work starts. Call (888) 260-4909 for an exact quote – estimates are free.
Yes, we service LiftMaster equipment along with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We diagnose by brand, so we know the specific wear points and control logic to check on each system. That means fewer guessed parts and a more accurate repair. Call (888) 260-4909 for an exact quote – estimates are free.
Same-day service is often available for gate repairs in Washington, so call and we’ll find the next opening. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (888) 260-4909 for an exact quote – estimates are free.
We stand behind the work and confirm the warranty terms with you before the job starts. What’s covered depends on the repair and the parts used, and we put it in writing with the estimate. You’ll know the terms before any work begins. Call (888) 260-4909 to go over the details – estimates are free.
Clear access to the gate and its operator so the technician can reach both sides without moving vehicles or stored items. Note what the gate is doing, when it started, and the brand if you know it. Keep children and pets away from the gate while it’s being tested. If the gate won’t sense an obstruction, don’t operate it until we arrive. Call (888) 260-4909 for an exact quote – estimates are free.
Schedule Your Gate Repair Service in Washington Today
A gate that won’t open or close is a security gap, and it won’t fix itself. Call (888) 260-4909 to book a free on-site estimate and a written price you agree before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Gate-only specialists repair what you own, on the brand you already have, in Washington.
Written by the team at Gate Repair Washington.