Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Washington, DC
A gate in Washington, DC has to do more than open and close. Many of the gates we install here hang on masonry piers, sit behind a historic review board’s approval, or guard an alley entry that a row house shares with three neighbors. We’re a gate-only company, and installation is the job we measure, plan and set ourselves, which means the gate you get is built for the pier, the swing clearance and the security need in front of us. Electric gate systems are our specialty too, from operators and control boards to loop detectors and access controls. Call (888) 260-4909 for a free estimate.
Why Washington Homes Are Different
Washington‘s housing stock shapes gate work more than most cities do. A large share of the gates we see hang off 19th- and early-20th-century row houses with original ironwork, and behind those facades you’ll find carriage-house entries and shared alley gates that open onto service courts too narrow for a standard driveway swing. Upper Northwest adds mid-century brick colonials, and post-war brick apartment buildings often share one heavy alley gate between a dozen units. The masonry piers that hold those gates settle, and a settled pier throws a gate out of alignment long before the hinge or latch fails.
The climate adds its own pressure. Washington’s humid subtropical weather swings through freeze-thaw cycles in winter, then settles into high summer humidity that speeds rust on iron gates. Heavy summer thunderstorms and the occasional nor’easter bend frames and dislodge rollers. The region’s clay soils are the quiet culprit: posts move, gates sag, and a gate that worked last spring starts dragging by fall. And in parts of Washington, historic preservation review decides which materials and profiles are allowed before any repair begins.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Washington Services
These are the two jobs Washington homeowners and property managers call about most, and each has its own detailed page if you want to go deeper.
Gate Repair in Washington
Manual gate repair in Washington usually comes down to alignment and iron. Masonry piers settle and hinges pull out of plumb, and the clay soils underneath make that worse over time. On the wrought-iron and cast-iron gates common in older neighborhoods, rust at the welds and hinge brackets is the repair we handle most. We straighten and rehang, replace worn hardware, and treat rust before it eats into a profile that’s hard to replace. In areas under historic review, matching the original hardware matters as much as making the gate swing. If you need the manual side of the work, start with gate repair.

Electric Gate Repair in Washington
Electric gate repair is our named specialty, not a sideline. An automated gate in Washington fails in ways a general contractor won’t diagnose: a control board that’s bricked after a storm surge, a safety loop detector that reads phantom traffic on a wet driveway, an operator that strains against a settled pier and trips its limits. We diagnose by brand logic instead of trial and error, and we work on the opener you already own. Heavy alley gates shared by row houses often carry the most wear. For the automated side, see electric gate repair.

Gate Installation in Washington

New gate installation in Washington starts with what the property already has before we think about what it needs. A row house with a settled masonry pier can’t take a heavy slide gate without footing work first, and an alley entry shared by several units has to clear the trash truck’s swing. The humid climate pushing rust into iron, plus DC’s historic preservation review, means we settle the material, finish and clearance questions before anything is ordered. We measure, plan and set the gate to spec, and we can put the operator and access control on it too.
Automatic Gate Installation
Signs you need it
You’re driving to the gate to open it by hand, or an existing operator has failed once too often and the repair math no longer makes sense.
What it costs in Washington
Automatic gate installation in Washington typically runs $3,500 to $7,500 for a residential swing gate, and $5,000 to $12,000 for a slide gate with an operator.
How we do it
We measure the opening and check the piers, set the gate on its posts and hinges, then mount the operator, run the power and wire in the safety edges and loop detector.
Sliding Gate Installation
Signs you need it
Your driveway is too narrow or too sloped for a swing, or a swing gate would block the sidewalk or a shared alley entry.
What it costs in Washington
Sliding gate installation in Washington is typically $5,000 to $12,000 with an operator, and $2,600 to $5,500 for a manual slide gate.
How we do it
We set a level track and run the gate on v-groove rollers, then frame the posts to the footing depth the gate’s weight needs, which matters on Washington’s clay soils, and align the guide rollers so it tracks true.
What Gate Installation Costs in Washington
These are typical ranges for the Washington market, and the written estimate sets the final price. Historic preservation review, footing work on a settled pier, and the access control you choose all shift the number.
| Item | Typical range in Washington |
|---|---|
| Manual gate installation | $1,800 – $4,200 |
| Automatic swing gate installation | $3,500 – $7,500 |
| Sliding gate installation with operator | $5,000 – $12,000 |
Do you handle the power run and the safety edges on a new gate?
Yes. A new automated gate in Washington includes the power run to the operator and the safety edges and loop detectors that stop the gate on contact. That’s the part of the job we won’t skip.
Can I install a new gate on an existing masonry pier?
Often yes, if the pier is sound and plumb. A settled pier in Washington’s clay soils usually needs repair or a new footing first, and we check that during the free measure.
Brands We Service in Washington
We work on the brand you already have. Our technicians are trained and experienced on DoorKing, LiftMaster, Mighty Mule and Elite, along with the rest of the majors, and we diagnose by brand logic rather than guesswork. We don’t stock parts on a truck; we identify what’s needed and order it. See our brands for the full picture. For the main overview, Gate Repair Washington covers how the three service lines fit together.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Washington, DC
The ranges below are typical for Washington and set per job by the written estimate. Repairs are priced after we see the gate, so nothing here is a guess dressed up as a quote.
| Service | Typical range in Washington |
|---|---|
| Gate repair (manual) | $150 – $400 |
| Gate hinge and hardware replacement | $120 – $350 |
| Gate realignment | $150 – $450 |
| Electric gate repair | $200 – $600 |
| Control board replacement | $300 – $800 |
| Operator replacement | $800 – $2,000 |
| Safety loop detector repair | $250 – $600 |
| Access control repair | $250 – $700 |
| Manual gate installation | $1,800 – $4,200 |
| Automatic swing gate installation | $3,500 – $7,500 |
| Sliding gate installation with operator | $5,000 – $12,000 |
What pushes price up in Washington is the property, not the gate: historic preservation review that requires specific materials and profiles, custom cast-iron finials and period hardware, footing work on a settled masonry pier, and access control systems for shared alley entries. We quote and agree the price before any work starts, so the invoice you get is the estimate you approved.
Neighborhoods We Serve in Washington
We work gates across Washington, and the job looks different block to block. In Georgetown, Kalorama and Sheridan-Kalorama, historic wrought-iron and cast-iron estate gates under ANC 2E and Old Georgetown Board review mean documentation and matching profiles before a permit. Upper Northwest’s brick colonials and post-war apartments bring shared alley gates on settled piers. We schedule on-site estimates across Washington with fast dispatch from 7am to 7pm, Sunday through Friday.
- Georgetown
- Kalorama
- Sheridan-Kalorama
- Upper Northwest
- Capitol Hill
Service Area – Cities Near Washington
Washington, DC sits inside a tight metro, and we plan on-site estimates for surrounding communities on the same free-estimate basis. Jobs that cross the DC line still get the same measure, written price and approval before work starts. If you’re outside the District, tell us the address when you call and we’ll confirm coverage and schedule the visit.
Serving Washington, DC – Our Local Coverage Area
We serve Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Washington
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Repair calls can often be same-day; installation is measured and scheduled. A call outside dispatch hours is booked into the next opening.
In Georgetown, exterior gate repairs visible from the street require approval from the Old Georgetown Board, and other historic districts carry similar review. We document existing hardware and profiles first; ask the board or DC’s building department what your address requires before work starts.
We cover Washington, DC, including Georgetown, Kalorama, Sheridan-Kalorama, Upper Northwest and Capitol Hill. Give us the address when you call and we’ll confirm coverage and set the on-site estimate.
Call (888) 260-4909 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We measure first, quote in writing, agree the price before any work starts, and we work on the brand you already have.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Washington Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Lisa Fletcher"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Imani Jackson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Keisha Nash