Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Washington?
Gate installation in Washington typically costs $2,800 to $9,500 for a residential driveway gate with an operator, or $1,400 to $3,200 for a pedestrian or garden gate. A basic manual swing gate sits at the low end, while a wide automated slide gate with access control and new wiring runs toward the top of the range. The written estimate you get after an on-site look sets the final price.
We’re gate-only specialists, which means the people quoting your job aren’t fitting gates between fence panels and plumbing calls. Every visit is a gate visit. Our technicians have up to experience, and we work on the brand you already have, from LiftMaster operators to DoorKing access systems.
Key Takeaways
- Most residential automated gate installs in Washington land between $2,800 and $9,500, all-in.
- Manual gates are cheaper to buy but don’t solve security or convenience the way an operator does.
- Driveway width, gate material, and whether power already reaches the gate post are the three biggest price levers.
- New electrical runs and access control push a job toward the top of the range.
- Estimates are free. Call (888) 260-4909. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Installation Cost Breakdown (2026)
Here’s what each piece of a gate installation costs in Washington when priced separately. Bundled jobs usually come in lower than the sum of individual line items, but these ranges give you a realistic picture of where the money goes.
| Line Item | Typical Range (Washington, 2026) |
|---|---|
| Manual swing gate (single leaf, up to 12 ft) | $1,400 – $3,200 |
| Manual double swing gate (driveway, up to 24 ft total) | $2,400 – $5,200 |
| Sliding gate (manual, 12-16 ft) | $2,600 – $5,800 |
| Pedestrian or garden gate | $900 – $2,100 |
| Swing gate operator (arm or articulated) | $850 – $1,900 |
| Slide gate operator | $1,100 – $2,400 |
| Access control (keypad, fob, or intercom) | $450 – $1,600 |
| Safety sensors and loop detectors | $300 – $850 |
| New electrical run to the gate location | $600 – $2,200 |
| Battery backup for the operator | $250 – $600 |
| Removal and disposal of an old gate | $200 – $650 |
The gate itself is often less than half the total. On a fully automated driveway gate, the operator, wiring, and access control usually account for 40 to 60 percent of the bill. That surprises people who price a gate online and assume the hardware cost is the whole job. It’s also why we quote the gate and the operator together rather than selling one without the other.
On the lower end, a manual garden gate in a backyard rarely needs an operator or power, so it stays near the bottom of the table. On the upper end, a long driveway with no existing power at the gate line, a wide slide gate, and an intercom for guests pushes a job toward $9,000 and up. Both are common in Washington. The difference is what the property needs, not what the gate “should” cost.
What Affects Gate Installation Pricing in Washington
Five things move the number more than anything else. Know these before you get a quote and the estimate will make sense.
- Driveway width and gate span. A 10-foot opening allows a light-duty operator and a narrower gate. A 20-foot double driveway needs a heavier operator, stronger hinges, and often a center post, and the price climbs fast. When we measure, we look at the full span and what the gate has to clear, not just the width of the vehicle.
- Material and weight. Ornamental aluminum is lighter and easier on an operator than a solid wood gate, which needs more torque, more charging cycles, and more frequent adjustment. Heavy gates drive operator selection, and operator selection drives cost. We match the operator to the gate you want, not the other way around.
- Power at the gate post. If there’s an outlet within reach of the gate location, the electrical portion of the job is small. If power has to be run from the house, that’s a real cost and it’s the single most common surprise on a Washington install. Ask early whether your gate location has line voltage.
- Access control and safety devices. Every automated gate in Washington needs safe operation for people on foot, kids, and pets. Loop detectors, photo eyes, and an edge sensor are priced in, and they protect you from the operator closing on something it shouldn’t. A keypad or intercom raises the total, but it’s the part most customers actually want.
- Site conditions and permitting. A sloped driveway, a brick-topped wall, a tight side yard, or an older property with mature trees all add labor. Most cities and the DC government require a permit for a new gate or wall on a property line, so ask your building department what applies to your address before scheduling. Permit fees are paid to the jurisdiction and aren’t part of our estimate.
- Brand and operator choice. We work on the brand you already have, or help you choose one that fits how you’ll actually use the gate. A residential LiftMaster or Ghost Controls operator on a single driveway is a different price than a commercial-grade DoorKing system with a higher duty cycle. Brand-agnostic service means we’re not locked into pushing one manufacturer, so the operator matches the job rather than a sales target.
How to Save on Gate Installation
There’s no discount coupon here, but there are real decisions that lower the bill without cutting corners on safety.
- Pick the operator to fit the gate, not to impress. A duty cycle built for a busy commercial entrance is wasted on a single-family driveway in Washington. Overbuilding the operator adds hundreds to the price and delivers nothing you’ll notice day to day.
- Check the power situation before you commit to a gate location. Moving a gate two or three feet to reach an existing outlet can save the electrical run. Ask us to look at alternatives during the free estimate.
- Repair what you have if the gate and posts are sound. If your existing gate is mechanically fine and only the operator has failed, a repair is far cheaper than a full install. We’ll tell you honestly which one you’re facing. Our gate repair washington service exists exactly for that situation.
- Have the site ready. Clearing the gate line of brush, moving vehicles off the driveway before the crew arrives, and confirming where the power will connect all shorten the labor day.
- Bundle the gate, operator, and access control into one estimate. A single scope from a single gate-only specialist is cheaper than three contractors each charging their own trip and markup. Our Washington service page covers the full range of what we handle in the city.
If you’ve had a quote from a fence contractor and it seemed light, it’s worth a second look. Fence installers often quote the gate only, then hand the automation off to an electrician or a gate company, and the final total ends up higher. We quote the whole job: gate, operator, wiring, sensors, and access control. Electric gate down? That’s exactly what we do. Call (888) 260-4909 and we’ll set up a free on-site estimate.
FAQs – Gate Installation Cost
How much does a driveway gate cost installed in Washington?
A driveway gate installed in Washington typically runs $2,800 to $9,500 for an automated setup, or $1,400 to $4,200 for a manual driveway gate without an operator. Wide slide gates with new electrical and access control sit at the top of that range. Call (888) 260-4909 for an exact figure; estimates are free.
Is it cheaper to install a sliding gate or a swing gate?
Swing gates are usually cheaper to install, often by $400 to $1,200, because the site prep is simpler and the operator is less expensive. A slide gate needs clearance alongside the opening and a firmer track, which adds labor. If your Washington property has the side room and wants the tighter footprint, the slide gate often pays for itself in the long run. Call (888) 260-4909 and we’ll price both.
Do I need a permit for a gate installation in Washington?
Most likely yes. A new gate on a property line, a gate attached to a wall, and any new electrical work generally require a permit in Washington. Ask your DC building department what applies to your address. Permit fees are separate from our estimate. For help scoping the job first, call (888) 260-4909; estimates are free.
Does a gate installation include the operator and wiring?
Yes, in a full automated install we quote the gate, the operator, the safety sensors, access control, and the electrical run together. A gate-only install without the operator runs $1,400 to $5,800 depending on gate type and span. If you already own an operator, we can quote the gate and installation separately. Call (888) 260-4909 to talk through the scope.
Can you install a gate around an existing operator, or will I need a new one?
Often we can reuse an existing operator if it’s rated for the new gate’s weight and width, which saves $850 to $2,400. Our technicians assess the operator by brand and condition during the estimate, and we work on the brand you already have. If the operator won’t carry the new gate, we’ll say so plainly and quote the replacement. Call (888) 260-4909; estimates are free.
How long does a typical gate installation take?
Most residential gate installations in Washington take one to three days once materials are on site. Electrical runs and permitting can add time before the crew arrives. Repairs are almost always faster than installs. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, so you can book the estimate when it suits you.
What’s the most common reason a gate installation quote comes in higher than expected?
Power. If line voltage isn’t already at the gate location, running it from the house adds $600 to $2,200. That’s the single biggest swing on a Washington gate install, and it’s avoidable by reviewing the site layout before committing. Call (888) 260-4909 for a free on-site estimate and we’ll walk the property with you.
From Operator Failure to Full Installation
We handle the full gate lifecycle: repair, electric-system repair, and new installation. If your gate is failing, call and we’ll look at repairing what you have before pricing a replacement. If you’re starting fresh, we’ll design and install the gate, the operator, and the access control in one scope so you’re not chasing three vendors when something goes wrong. We cover the nine brands our customers ask about most: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That brand fluency is why we diagnose by brand, not by trial and error.
Call (888) 260-4909 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Ask about the budget you have in mind and we’ll be straight with you about what it covers.
Written by the team at Gate Repair Washington.
Pricing reflects the Washington market as of 2026. Gate Repair Washington offers free estimates – call (888) 260-4909.
What Our Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Lisa Fletcher"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Imani Jackson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Keisha Nash